Fence Installers in Vancouver, BC

Fencing in Vancouver has to stand up to one of the wettest climates in Canada — long, mild, rain-soaked winters that rot untreated wood and grow moss on anything that stays damp. That's why powder-coated steel, aluminum and hog-wire panels have become the low-maintenance default across the city, from the flat, dense lots of East Van to the steep, rocky slopes of the North Shore. On sloped North Shore and Point Grey properties, rigid metal panels can be stepped cleanly down a grade, and good drainage at the post base matters far more here than it would in a dry climate.

West-coast homes around Vancouver lean toward clean horizontal lines: steel-frame hog-wire for an open, contemporary look, full-privacy metal or steel-board panels for tight laneway and infill lots, and powder-coated aluminum where a lighter ornamental profile suits the street. Corrugated metal shows up on modern builds and Vancouver Special renovations. Because so many city lots are narrow and overlooked, privacy at the rear and side is usually the priority, while front yards stay low and open.

The City of Vancouver generally limits front-yard fences to about 1.2 m (4 ft) and rear and side fences to about 1.8 m (6 ft), with sight-line rules on corner lots near intersections and lanes. Pool and hot-tub enclosures carry their own non-climbable height and self-closing, self-latching gate requirements under the BC Building Code. Rules differ in the City of North Vancouver, Burnaby and the University Endowment Lands, so confirm heights with your municipality before you build.

BarrierBoss delivers to the Metro Vancouver area. Get an all-in price in Canadian dollars with our fence calculator, or request a quote and find a local pro — panels we make, move and unload ourselves. Pay by card or Interac e-Transfer. Install fences for a living? Join the BarrierBoss Fence Pro Network and get homeowner leads in your area.