What's in the DIY wood and metal fence kit?
Parts for one framed panel: four pre-cut KDBT 2x4 frame boards, eight pre-cut 1x2 inlays, 26-gauge corrugated steel sized to the frame, and decking screws. Posts and gates are ordered separately.
Does the treated wood kit need any cutting?
No. The lumber and steel arrive at their finished sizes, so you're only fastening. Don't cut the steel, since bare cut edges aren't covered by the warranty. If you trim any lumber, brush a copper-based end-cut preservative on the fresh end.
What tools does the treated wood kit take?
A drill or impact driver, tape measure, carpenter's square and level. Assemble on a flat surface such as a garage floor or sawhorses so each frame stays square.
Which sizes and colours are available in the treated kit?
Every panel is 8' wide and 4', 5', 6', 7' or 8' tall. Steel comes in Black, Grey or Brown, or unpainted Corten Steel, and you can build it with the wave running vertical or horizontal.
Is the treated kit steel finished on both sides?
Yes. Black, Grey and Brown have HDP paint on both faces, so both yards see a finished fence.
What should I know about Corten Steel in the treated kit?
It's raw weathering steel that rusts to an orange patina over its first several weeks to a few months outdoors. Early rain can stain pale concrete or stone, which is normal and not a defect, so build over gravel or planting.
Do I need to stain the treated lumber?
No. KDBT pressure-treated wood resists rot on its own and turns silver-grey if left bare. Stain or paint it after assembly, or before the steel goes in, if you want a set colour.
How is the treated wood kit different from the cedar kit?
The steel and pre-cut design are the same; only the wood changes. Treated lumber is the economical option, while cedar costs more and has a warmer grain. See the DIY cedar and metal privacy fence kit.
Should I buy the DIY kit or assembled treated panels?
Go with the kit if you enjoy building, want to save on assembly or plan to stain first. For ready-to-hang sections, see the treated wood corrugated metal fence panels.
How many posts go with the treated wood kits?
Posts aren't included. Add one post to your panel count for a straight run, plus one per gate. Wood fence posts match the frame, and black steel fence posts won't rot at grade.
What's the warranty on the DIY treated wood kit?
BarrierBoss covers the steel and finish for 40 years. On Corten, the rust patina and early runoff staining are natural and aren't treated as defects.
How is the DIY treated wood kit delivered?
On BarrierBoss trucks across BC, Alberta, Saskatchewan and Manitoba, with our crew unloading at your property. Check the estimate box with your postal code for pricing.
Most projects fit the sizes listed on this page — those are what we build, stock and price online.
We do make custom sizes within our standard range, and we quote them case by case. If your run falls between two listed sizes — say you need 7′ 6″ when we list 7′ and 8′ — we can build it. The cost depends on the dimensions, the profile and how much material the cut leaves behind, so custom sizes are not listed or priced on the site. Send us the measurements and we will tell you what is possible and what it costs.
Custom sizes are final sale. A panel cut to your dimensions cannot be restocked or sold to anyone else, so custom-sized orders cannot be returned or exchanged. Please confirm your measurements before you approve the quote.
These products can all be modified on site. Trimming a panel to close out a run is normal work, and you do not need us to do it for you — ask and we will walk you through how to cut and seal it properly so the finish holds up.
Just know that a cut edge is no longer a factory edge: cutting or drilling exposes unprotected steel and voids the steel & coating warranty on that component. Done the right way and sealed properly it will still last — so ask us before you cut.
- Standard-size items (unused, original condition) — returnable within 30 days, subject to a 25% restocking fee. We pick returns up on our own trucks (scheduled around truck availability), at no return-freight charge to you. Because we handle the transport, you're not liable for any transit damage.
- Custom, cut-to-size & made-to-order items — because these are built to your exact spec, they are final sale.
- Cancellations — full refund before your order enters production; once in production or scheduled to ship, a 25% restocking fee applies.
- Damaged or defective on arrival — fully covered. Every shipment is freight-insured end to end, so anything that arrives damaged is replaced or refunded at no cost — you're never on the hook for transit damage.
Spec sheets, installation guides, and product documentation — click any file to download. Opens in a new tab.
| Service | Delivery | Arrives | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Delivered & UnloadedAny product, any quantity — one truck, one charge | $149
|
Dec 3 – Dec 31 |
Our own trucks and our own crew — no broker, no depot, no freight terminal. We unload and set it where you want it, and every load is freight-insured: damage in transit is replaced or refunded at no cost. There is no order minimum.
Made, Moved & Unloaded by Us.
Best in Class Warranty
Secure Checkout and Payment Plans
SKU: DIY-CF-4x8-BK

































































